Name: Grado Prestige Series Stylus
SKU: 6244
Availability: InStock

Description

The easiest way to enter the analog world. These entry-level cartridges punch above their weight class. All Grado Prestige series styli are designed compatible, so any of these styli are able to work in any Prestige body. The performance difference translates into real sonic improvements; as you move up the Prestige line, the sound becomes smoother, more open and more detailed. Genuine replacement styli for all Grado Prestige cartridges including black, green, blue, red, silver and gold. A worn stylus can cause serious (irreversible) damage to your records, and provide poor sound quality

Optimized Transmission Line (OTL) Cantilever/Stylus Assembly
Grado’s OTL provides an ideal transfer of the signal from point to point, e.g., stylus to cantilever to magnet to coils, etc. This has been achieved by eliminating resonance at each of these key junctions. The transmission line cantilever consists of separate sections that are telescoped into each other. All sections are made of different alloys, some sections hollow, other sections solid. These sections are bonded together with materials that act as dampers, and are coated with a black proprietary material which controls and absorbs resonances that travel on the surface of the cantilever (known as skin effects). The OTL stylus/cantilever design will make your records sound quieter, improve the height, width, and depth of the soundstage, and offer more detail than previously obtainable. Cartridge Holography does exist…and that is what Grado’s OTL technology is all about, more performance.

Pivoted-Fixed Axial Cantilever/Stylus Generator
This design feature is basically quite simple. The “OTL” cantilever shaft is brought to a fixed axial pivot that supports the entire cantilever assembly. A miniature element attached to the end of the cantilever is allowed to move freely within the lines of flux of a stationary magnet and coil structure. This system of support is mechanically more accurate (more linear) than conventional “teeter-totter” designs that utilize an iron armature to balance the mass of the cantilever. The teeter-totter design is supported in the centre with a rubber donut mounting. The fixed axial design has a very low tip mass, which results in lower distortion, improved transient response, and longer record life.

Grado Prestige Black 3 Stylus

The Grado Prestige Black Replacement Stylus is designed to fit the Grado Prestige Black MM Phono Cartridge – a direct replacement. High quality Elliptical needle.

Compatibility: Compatible with BLACK1 and BLACK2
OTL: 3-piece dampened aluminum cantilever
Recommended Tracking Force: 1.5g
Stylus Type: Grado Special Elliptical
Compliance CUs: 20